The Electro Magnetic Firing (EMF) system of the HSP Series, along with its unique burner design, makes this popular hot water pressure washer one of the most "in-demand" in the industry. It's a great solution for removing heavy mud from construction and ag equipment.
Pump: Preset stainless-steel and brass unloader valve · Forged brass manifold · Thermal relief valve · Low pressure detergent injector
Frame: Reinforced powder coated steel tube frame with center balanced lift · Convenient gun/wand holder and hose wrap · 13-inch flat-free tires
Components: No. 1 kerosene fired burner (Not approved for bio-fuel) · Top-fired powder coated heat exchanger
Miscellaneous: Temperature rise 150°F/66°C above ambient, maximum outlet temperature is 200°F
Unit Includes: Quick connect nozzles - 0°, 15°, 25° and 40° · 50-foot x 3/8-inch steel wire-braided high pressure hose with quick connects · Adjustable pressure insulated dual lance · Professional-grade insulated
The SD50 work platform combines the best of our self-propelled and trailer mounted ranges.
It offers the same impressive reach capabilities as the TM50 but with the versatility of a robust yet very lightweight drivable base.
This allows the operator to maneuver, set up and operate the SD50 work platform without leaving the platform, especially on uneven surfaces.
Rough terrain tires and 4WD as standard allow the SD50 work platform to maneuver easily over a wide range of site conditions and its outstanding reach makes it ideal for tree care or construction site work.
The C185WDZ from Doosan Portable Power has been designed with advanced engineering and a dependable Tier 4 Final-compliant Deutz engine, which powers the C185 and supplies ample power for your various applications. The C185 features a small footprint, making it very maneuverable and easy to tow. The compressor is protected by a virtually indestructible single-piece composite canopy, ensuring long unit life and making the C185 one of the most durable, dependable compressors on the market.
No need for wheelbarrows, shovels or other hand tools when you roll onto tight jobsites with the Bobcat® MT85 mini track loader. The MT85 goes through gates, doorways or other narrow spaces with ease.
The MT85 offers a performance boost with its improved rated operating capacity, increased breakout force and a 14 percent increase in lift height. The smoother ride leads to less spillage of material during transportation, allowing for faster cleanup at the end of your job. The MT85 increases top travel speeds by 23 percent to help you complete tasks faster.
New! 695XL Gas-Powered Concrete & Utility Pipe Chain Saw
Deepest, Most Versatile Gas Powered Saw
The new 695XL features include an easy to start engine with higher energy ignition system and durable, long-lasting components including a new muffler, carburetor and piston & cylinder. Available with 14 inch guidebar and MAX series diamond chain. Based on the best-selling 695 saw platform, the 695XL is the highest horsepower ICS gas saw for frequent-use by general construction, utility contractors and concrete professionals.
Intec has further enhanced our popular FORCE/2!
Simple Power Requirements
Powered by two easily accessible 15amp circuits
High Production Rates
• 96 bags/hr cellulose; 2400 lbs/hr.
• 23 bags/hr fiberglass; 700 lbs/hr.
• 70 bags/hr rock wool; 2100 lbs/hr
Wheel Kit Enhances Portability
Ratchet strap allows for quick assembly
The FORCE/2 Next Generation still comes with these industry leading components on which it has built its reputation for durability and reliability:
Polyethylene construction: rust-free, lightweight, and extremely durable.
Urethane seals: last 2-3X longer than belted rubber providing higher pressures & production rates over time with less maintenance.
Stainless steel airlock plates: provide long wear life vs. industry standard a
The SL-1218RHS is a high speed model designed specifically for sanding decks, and runs at twice the RPM and is also available from us.
NOTE: 12" x 18" Essex Silver line 1218thkw thick white pad MUST be used with this item to ensure proper use and outcomes. Sold Seperately
Detachable 40 lb (18.2 Kg) weight
Large 10” semi-pneumatic tires
Collapsible handle assembly
Uses blade widths of 6” up to 16” (5.3cm to 40½cm)
The Taylor 462 stripper features time-tested blade cutting action and is compact and maneuverable enough to enable one person to easily remove most types of floor covering materials from concrete or wood floors. The result is a smooth, clean surface ready for recovering. The sister to the 462, the 460, has the same performance specifications and is available with a more modest front end assembly along with a one year warranty.
Reliable, 3/4 HP direct drive, sealed induction motor-75% quieter than right angle drive motors.
Rip cut 14" and diagonally cut 10" tile. Cast aluminum motor housing and blade guard.Welded steel frame. Rigid cutting table. Patented, self-cleaning cutting table roller guides. Durable easy to clean ABS polymer pan. Saw with 8" premium diamond blade, four cutting guides, water pump, wrenches.
The legendary PD-55. For nearly forty years, the PD-55 and its predecessor the PD-50 have been the productivity
leaders in post driving. At just 54 pounds, the brutally tough PD-55 is capable of handling your toughest applications
quickly and efficiently. The PD-55 is ideally suited for driving t-posts, ground rod, tent stakes, grape stakes,
delineator posts, form pins and fence posts up to 3 5/8”.
“Give me a lever and I can move the world.”
The MP-3 may not be able to move the whole world, but it certainly is capable of pulling the toughest posts.
This puller has phenomenal strength to weight ratios. At 41 lbs, the MP-3 is easily field portable
and is equipped to meet most pulling needs.
The MP-3 is simple to operate and is built with high grade materials.
This unit is nearly indestructible and will provide decades of service.