No need for wheelbarrows, shovels or other hand tools when you roll onto tight jobsites with the Bobcat® MT85 mini track loader. The MT85 goes through gates, doorways or other narrow spaces with ease.
The MT85 offers a performance boost with its improved rated operating capacity, increased breakout force and a 14 percent increase in lift height. The smoother ride leads to less spillage of material during transportation, allowing for faster cleanup at the end of your job. The MT85 increases top travel speeds by 23 percent to help you complete tasks faster.
Intec has further enhanced our popular FORCE/2!
Simple Power Requirements
Powered by two easily accessible 15amp circuits
High Production Rates
• 96 bags/hr cellulose; 2400 lbs/hr.
• 23 bags/hr fiberglass; 700 lbs/hr.
• 70 bags/hr rock wool; 2100 lbs/hr
Wheel Kit Enhances Portability
Ratchet strap allows for quick assembly
The FORCE/2 Next Generation still comes with these industry leading components on which it has built its reputation for durability and reliability:
Polyethylene construction: rust-free, lightweight, and extremely durable.
Urethane seals: last 2-3X longer than belted rubber providing higher pressures & production rates over time with less maintenance.
Stainless steel airlock plates: provide long wear life vs. industry standard a
Intec’s FORCE/1 processes over 540 pounds of cellulose per hour and weighs 177 pounds. This system allows for ease of transportation to the job site in addition to timely installation of attic
Intec’s highly portable Cyclone processes over 800 pounds of cellulose or 200 pounds of fiberglass per hour while weighing only 142 pounds with our recently enhanced aluminum airlock. This system provides ease of transportation to the job site, in addition to timely installation of attic insulation – less than 1 hour to install R-19 cellulose and under 1-1/2 hours to install R-19 fiberglass in a 1000 square foot attic
Tough, wear resistant, ductile iron baseplate offering high strength and shock resistance. This patented computer designed baseplate has a tapered bottom and edges for high speed and excellent maneuverability. Designed for the compaction of granular and mixed materials with some cohesive content in confined areas such as parking lots, highway and bridge construction, next to structures, curbs and abutments
Patented oil-injected system provides reliable performance by eliminating spark plug fouling and carbon buildup. The no-mix system is an added convenience for operators. Plus an amazing fuel to oil ratio of 120:1 allows for longer and cleaner run tiems... up to 65 hours on a single tank of oil. A low oil shutdown switch prevents running the rammer without oil, for trouble free operation. Exclusive air filter compensation system allows for longer run time between filter changes