Product Catalog

  • Manufacturer: Bobcat
  • Model Number: MT85

No need for wheelbarrows, shovels or other hand tools when you roll onto tight jobsites with the Bobcat® MT85 mini track loader. The MT85 goes through gates, doorways or other narrow spaces with ease.

The MT85 offers a performance boost with its improved rated operating capacity, increased breakout force and a 14 percent increase in lift height. The smoother ride leads to less spillage of material during transportation, allowing for faster cleanup at the end of your job. The MT85 increases top travel speeds by 23 percent to help you complete tasks faster.

  • Model Number: 1648

Clemco Sandblaster 3CUFT with 1" piping. Comes with HP respirator and accessories

  • Manufacturer: DeWalt Tools
  • Model Number: DX215HD

215,000 BTU Kerosene Heater

Uses Kerosene or #1 Diesel fuel

  • Model Number: 695XL

New! 695XL Gas-Powered Concrete & Utility Pipe Chain Saw

Deepest, Most Versatile Gas Powered Saw

The new 695XL features include an easy to start engine with higher energy ignition system and durable, long-lasting components including a new muffler, carburetor and piston & cylinder. Available with 14 inch guidebar and MAX series diamond chain. Based on the best-selling 695 saw platform, the 695XL is the highest horsepower ICS gas saw for frequent-use by general construction, utility contractors and concrete professionals.

  • Manufacturer: Bobcat
  • Model Number: E26

Bobcat E26 Mini Exavator

  • Manufacturer: Intec
  • Model Number: F/2 NEXT GEN

Intec has further enhanced our popular FORCE/2!

Simple Power Requirements

Powered by two easily accessible 15amp circuits

 High Production Rates

•       96 bags/hr  cellulose; 2400 lbs/hr.

•       23 bags/hr fiberglass; 700 lbs/hr.

•       70 bags/hr rock wool; 2100 lbs/hr

Wheel Kit Enhances Portability

Ratchet strap allows for quick assembly

The FORCE/2 Next Generation still comes with these industry leading components on which it has built its reputation for durability and reliability:

Polyethylene construction:  rust-free, lightweight, and extremely durable.

Urethane seals:  last 2-3X longer than belted rubber providing higher pressures & production rates over time with less maintenance.

Stainless steel airlock plates:  provide long wear life vs. industry standard a

  • Manufacturer: Graco
  • Model Number: 230

Graco Rental Pro 230 Paint Sprayer

  • for Latex paints only ( water based )

  • Manufacturer: Genie
  • Model Number: GS1930

Genie Scissor lift, Electric

19ft. max platform height

30in. wide

  • Manufacturer: Essex Silver Line
  • Model Number: 1218R

The SL-1218RHS is a high speed model designed specifically for sanding decks, and runs at twice the RPM and is also available from us.

NOTE: 12" x 18" Essex Silver line 1218thkw thick white pad MUST be used with this item to ensure proper use and outcomes. Sold Seperately

  • Model Number: DT61252E
  • 9,000lb Dump Trailer
  • Tandum axel
  • 2 5/16" ball
  • power up and power down
  • 7 way round trailer light plug

  • Manufacturer: Suncast
  • Model Number: SRR2100

20FT. Roof Rake

  • Manufacturer: Lenox Tools
  • Model Number: 5615-29

FEATURES

  • Exclusive BodyGrip® Design
  • 1-3/4 Max HP, 11 Amp, 24,000 RPM Milwaukee Motor
  • Exclusive Linear Depth Adjustment System
  • 1/4 in. and 1/2 in. premium self-releasing collets

  • Manufacturer: Taylor Tools
  • Model Number: 462

Detachable 40 lb (18.2 Kg) weight
Large 10” semi-pneumatic tires
Collapsible handle assembly
Uses blade widths of 6” up to 16” (5.3cm to 40½cm)
The Taylor 462 stripper features time-tested blade cutting action and is compact and maneuverable enough to enable one person to easily remove most types of floor covering materials from concrete or wood floors. The result is a smooth, clean surface ready for recovering. The sister to the 462, the 460, has the same performance specifications and is available with a more modest front end assembly along with a one year warranty.

  • Manufacturer: Felker
  • Model Number: TM75

Reliable, 3/4 HP direct drive, sealed induction motor-75% quieter than right angle drive motors.
Rip cut 14" and diagonally cut 10" tile. Cast aluminum motor housing and blade guard.Welded steel frame. Rigid cutting table. Patented, self-cleaning cutting table roller guides. Durable easy to clean ABS polymer pan. Saw with 8" premium diamond blade, four cutting guides, water pump, wrenches.

  • Model Number: PD55

The legendary PD-55. For nearly forty years, the PD-55 and its predecessor the PD-50 have been the productivity
leaders in post driving. At just 54 pounds, the brutally tough PD-55 is capable of handling your toughest applications
quickly and efficiently. The PD-55 is ideally suited for driving t-posts, ground rod, tent stakes, grape stakes,
delineator posts, form pins and fence posts up to 3 5/8”.

  • Model Number: MP3

“Give me a lever and I can move the world.”
~ Archimedes

The MP-3 may not be able to move the whole world, but it certainly is capable of pulling the toughest posts.
This puller has phenomenal strength to weight ratios. At 41 lbs, the MP-3 is easily field portable
and is equipped to meet most pulling needs.
The MP-3 is simple to operate and is built with high grade materials.
This unit is nearly indestructible and will provide decades of service.

 

  • Manufacturer: Porter-Cable
  • Model Number: 7812
  • Variable-speed dial settings from 1,400-2,000 RPM
  • Brush-type skirt surrounds sanding pad, preventing gouging of wall joints and aiding in dust collection
  • Motor located on opposite end of handle from sanding head, providing balance and control
  • Built-in dust collection hose
  • 1 1/4" vacuum hose is 13' long so that large areas can be sanded in one set up
  • Articulating sanding head allows user to sand wide area without changing positions

  • 6ft. x 12ft. enclosed trailer
  • rear fold down ramp door
  • 2in. ball
  • 4 flat trailer light plug

  • 8ft. x 16ft.
  • back, fold down ramp door
  • side door
  • 2 5/16in. ball
  • electric brakes
  • 7 way round trailer light plug

  • 4 place snowmoblie trailer
  • with ramp
  • 3000lb
  • 2in. ball
  • 4 flat trailer light plug

  • can haul up to a 24ft. pontoon
  • 3000lb
  • 2in. ball
  • 4 flat trailer light plug

  • 12000lb
  • with ramps
  • electric brakes
  • 2 5/16in. ball
  • 7 way round trailer light plug

  • 7ft. x 14ft.
  • 14000lb
  • with ramps
  • power up and power down
  • electric brakes
  • 2 5/16in. ball
  • 7 way round trailer light plug