Product Catalog

  • Manufacturer: Doosan Portable Power
  • Model Number: C185

The C185WDZ from Doosan Portable Power has been designed with advanced engineering and a dependable Tier 4 Final-compliant Deutz engine, which powers the C185 and supplies ample power for your various applications. The C185 features a small footprint, making it very maneuverable and easy to tow. The compressor is protected by a virtually indestructible single-piece composite canopy, ensuring long unit life and making the C185 one of the most durable, dependable compressors on the market.

  • Manufacturer: Bobcat
  • Model Number: MT85

No need for wheelbarrows, shovels or other hand tools when you roll onto tight jobsites with the Bobcat® MT85 mini track loader. The MT85 goes through gates, doorways or other narrow spaces with ease.

The MT85 offers a performance boost with its improved rated operating capacity, increased breakout force and a 14 percent increase in lift height. The smoother ride leads to less spillage of material during transportation, allowing for faster cleanup at the end of your job. The MT85 increases top travel speeds by 23 percent to help you complete tasks faster.

  • Model Number: 1648

Clemco Sandblaster 3CUFT with 1" piping. Comes with HP respirator and accessories

  • Manufacturer: DeWalt Tools
  • Model Number: DX215HD

215,000 BTU Kerosene Heater

Uses Kerosene or #1 Diesel fuel

  • Manufacturer: Kubota
  • Model Number: L3901

Kubota L3901 Tractor

  • Manufacturer: Honda
  • Model Number: EB5000X

EB5000X Honda Generator

  • Manufacturer: Honda
  • Model Number: EU2000

Honda EU2000 Generator

  • Model Number: 695XL

New! 695XL Gas-Powered Concrete & Utility Pipe Chain Saw

Deepest, Most Versatile Gas Powered Saw

The new 695XL features include an easy to start engine with higher energy ignition system and durable, long-lasting components including a new muffler, carburetor and piston & cylinder. Available with 14 inch guidebar and MAX series diamond chain. Based on the best-selling 695 saw platform, the 695XL is the highest horsepower ICS gas saw for frequent-use by general construction, utility contractors and concrete professionals.

  • Manufacturer: Bobcat
  • Model Number: E26

Bobcat E26 Mini Exavator

  • Manufacturer: Intec
  • Model Number: F/2 NEXT GEN

Intec has further enhanced our popular FORCE/2!

Simple Power Requirements

Powered by two easily accessible 15amp circuits

 High Production Rates

•       96 bags/hr  cellulose; 2400 lbs/hr.

•       23 bags/hr fiberglass; 700 lbs/hr.

•       70 bags/hr rock wool; 2100 lbs/hr

Wheel Kit Enhances Portability

Ratchet strap allows for quick assembly

The FORCE/2 Next Generation still comes with these industry leading components on which it has built its reputation for durability and reliability:

Polyethylene construction:  rust-free, lightweight, and extremely durable.

Urethane seals:  last 2-3X longer than belted rubber providing higher pressures & production rates over time with less maintenance.

Stainless steel airlock plates:  provide long wear life vs. industry standard a

  • Manufacturer: Hilti
  • Model Number: DDB4/17ULC

Hilti 5in. Diamond Core Bit

  • 5in. Diameter
  • 17in. Length
  • Wet or Dry

  • Manufacturer: Hilti
  • Model Number: DDB4/17ULC

Hilti 4in. Diamond Core Bit

  • 4in. Diameter
  • 17in. Length
  • Wet or Dry


  • Manufacturer: Hilti
  • Model Number: DDB2/17UCL

Hilti 2in. Diamond Core Bit

  • 2in. diameter
  • 17in. length
  • wet or dry

  • Manufacturer: Hilti
  • Model Number: DD150U

Hilti Core Drill with Stand.

  • Core Bits Rented Seperatly, Call for Pricing
  • Core Bit Sizes Avaliable: 2in. 4in. and 5in.
  • 3 Speed
  • 120 Volt
  • Wet or Dry operation
  • Wall Accessibility 1.6in.
  • Corner Accssibility 2.1in.

  • Manufacturer: Graco
  • Model Number: 230

Graco Rental Pro 230 Paint Sprayer

  • for Latex paints only ( water based )

  • Model Number: DT61252E
  • 9,000lb Dump Trailer
  • Tandum axel
  • 2 5/16" ball
  • power up and power down
  • 7 way round trailer light plug

  • Manufacturer: Lenox Tools
  • Model Number: 5615-29


  • Exclusive BodyGrip® Design
  • 1-3/4 Max HP, 11 Amp, 24,000 RPM Milwaukee Motor
  • Exclusive Linear Depth Adjustment System
  • 1/4 in. and 1/2 in. premium self-releasing collets

  • Model Number: LM1000

LM1000 Automatic Self-Leveling Rotary Laser
The LaserMark® LMH is conveniently paired with our top-of-the-line LD400 Universal Laser Detector and heavy-duty rod clamp.

Plumb beam for layout work
Scanning feature preset angles of 2º, 20º, 45º and 90º to increase beam visibility.
Out of level audible alarm
Low battery indicator
Two beams - horizontal/vertical beam and plumb up
57-LM1000 - LaserMark LMH1000 Laser; includes 57-LD400 Universal Laser Detector, target, Ni-Cad Battery and Charger, Hard-Shell Case, Batteries, Tri-pod, and Rod